- This topic has 6 replies, 6 voices, and was last updated 7 years ago by Joe.
-
AuthorPosts
-
January 13, 2015 at 10:39 pm #388
WesKeymasterSo since this seems to be one of the most talked about subjects on these cars other than engine swaps, here is you a place to let it out. Bag setups, who do you like, Mobsteel, ridetech, devious, any others? What do you like about them? What do you not like about them? Fit/finish, durability, ease of install, price, reliability? Let it out.. Got pics share them.
Instagram @wesakin
SuicideSlabs4LifeJanuary 13, 2015 at 10:40 pm #389
WesKeymasterIf you have contact info share that as well.. Don’t be greedy and keep it all to yourself.
Instagram @wesakin
SuicideSlabs4LifeApril 8, 2015 at 3:46 pm #556
timParticipantin few weeks mine is getting bagged. my buddy owns a customs shop and is going to custom make the kit for me. he does complete builds or pieces. once its done I post pictures.. his work is top notch
October 10, 2015 at 1:24 pm #830
AnonymousInactiveI just picked up 65 continental. It’s already dropped a few inches and sitting on 20’s (even though they are rockstars). It’s been blocked and chopped to lower it and I plan on using air bag of some sort. Not sure which company to go through so I figured this would be the best place to post in regards the best recommendation. I see ride tech has a kit pretty much already put together, but never heard anything good or bad.
October 27, 2015 at 8:33 am #837
brianParticipantI bought a kit from bc fab. level 3 kit with the choppin block a-arms. Their kit was less expensive and seemed better than the others in my opinion. I do believe choppin block makes 4 link kits also that dosent require cutting. Did not see a price on it tho. If you mention suicide slabs you also you get $100 off at bc fab.
February 18, 2016 at 9:07 pm #1006
MichaelParticipantWith bagging the car, does it take up a ton of trunk space typically? Any other negatives to this approach?
March 3, 2017 at 10:51 pm #1303
JoeParticipantMy 62 is bagged. I went with Suisidedoors.com. I run 4 compressors 10 gallons of air 8 valves and 1/2 inch line at 150 psi and a 4 link suspension. I use airlift bags 2600 series and smc valves. I have 10 switches. I’ve had my car bagged for about 15 years and no problems. I am going to redo the system this summer. Ride tech makes a nice kit. The rear kit would be 8000 series shockwaves from ride tech. They make control arms and shocks for the car too.
Attachments:
You must be logged in to view attached files. -
AuthorPosts
- You must be logged in to reply to this topic.