Modern window motors for my 65

Home Forums Tech Help Modern window motors for my 65

Viewing 6 posts - 16 through 21 (of 21 total)
  • Author
    Posts
  • #1183

    Clayton
    Participant

    Test and install. My first one I did I screwed up the wiring and it was correct on the door but reversed on the master switch. (how I came up with that helpful tip)

    if the motor works correct off the door switch but is reversed on the master- swap the green (86) and the blue(85) wires in the above diagram.

    if the motor goes the same way on the door and master switch but is reversed.  swap the purple (30) and blue (30) wires in the above diagram.

    Done!

    Attachments:
    You must be logged in to view attached files.
    #1189

    Jeremy
    Keymaster

    Thanks for the writeup!

    Resistance is Futile.

    #1260

    Joshua Briand
    Participant

    What did you do for the front 2 vent windows? Or are those not vacuum operated?

    #1262

    Jeremy
    Keymaster

    Vent windows can be either manual crank or electric depending on how the car was optioned.  I don’t know if anyone has swapped to different electric motors for the vent windows.

    Resistance is Futile.

    #1283

    JJ Cummings
    Participant

    Very cool, I’m going to give this a shot on my 64.

    64 Sedan
    Sacramento, Ca

    #1530

    S PHILLIPS
    Participant

    Did u use factor switches with the conversion , I have. Rebuilt all my switches and windows hardly work , go down but not power to go up or only half way .

Viewing 6 posts - 16 through 21 (of 21 total)
  • You must be logged in to reply to this topic.