-
Jonathan became a registered member 9 years, 7 months ago
-
Jeremy posted a new activity comment 9 years, 7 months ago
Have you tried using a temporary hot & ground jumper wire on the motor to get it to go up?
-
Steven posted 2 photos 9 years, 7 months ago
Thanks man. I’ll check those out for the switches. Any tips on disconnecting from roller mechanism. I have door torn apart and was trying to figure out today. Will taking off the 2 lower bolts at the bottom or the window accomplish anything. I didn’t want to screw up the up stop setting on the window IMG_0241
-
Have you tried using a temporary hot & ground jumper wire on the motor to get it to go up?
-
Tried that three ways, wire direct from battery, tried from the down wire (yellow with white stripe) coming from the left down relay by using the switch on the drivers door. The down position closes the circuit, that’s how I got the window down in the first place. I also tried a wire from the common wire (red with yellow stripe). All three…[Read more]
-
-
Jeremy replied to the topic looking for the 4 window switches in the front drivers door. Can anyone help? in the forum 61 – 69 Lincoln Parts 9 years, 7 months ago
You can email [email protected] and he can rebuild your switches if they aren’t too badly damaged.
Also, Mario the Lincoln guy out in California might have switches. 760-646-7996 or you can email him at [email protected]
In the off chance neither of those two can help you Baker’s Auto might have them. http://www.bakersauto.com/ Or…[Read more]
-
Jeremy posted a new activity comment 9 years, 7 months ago
Unless your switches are missing or totally screwed up somehow they’re repairable. Email [email protected] – he rebuilds switches.
As for the window there’s no easy way of getting it up if the motor doesn’t work. You’ll have to pull the panel and put it up manually. It might be possible to leave it connected to the motor and mechanism but…[Read more]
-
Thanks man. I’ll check those out for the switches. Any tips on disconnecting from roller mechanism. I have door torn apart and was trying to figure out today. Will taking off the 2 lower bolts at the bottom or the window accomplish anything. I didn’t want to screw up the up stop setting on the window IMG_0241
-
Have you tried using a temporary hot & ground jumper wire on the motor to get it to go up?
-
Tried that three ways, wire direct from battery, tried from the down wire (yellow with white stripe) coming from the left down relay by using the switch on the drivers door. The down position closes the circuit, that’s how I got the window down in the first place. I also tried a wire from the common wire (red with yellow stripe). All three…[Read more]
-
-
-
Steven started the topic looking for the 4 window switches in the front drivers door. Can anyone help? in the forum 61 – 69 Lincoln Parts 9 years, 7 months ago
I have a 67 Lincoln continental and I’m looking to replace all 4 window switches in the drivers door. Does anyone have any for sale or can point me in the right direction to find them. Help please
-
Steven posted a new activity comment 9 years, 7 months ago
Thanks man! I have a 67 coup model 53-A and have a few questions. My left rear window is down in the door, is there a way to manually get the window up? Also i need to replace all the window switches in the drivers door. Been looking online but can’t find any. Do you know where I can find those or know someone who would sell me the switches?
-
Unless your switches are missing or totally screwed up somehow they’re repairable. Email [email protected] – he rebuilds switches.
As for the window there’s no easy way of getting it up if the motor doesn’t work. You’ll have to pull the panel and put it up manually. It might be possible to leave it connected to the motor and mechanism but…[Read more]
-
Thanks man. I’ll check those out for the switches. Any tips on disconnecting from roller mechanism. I have door torn apart and was trying to figure out today. Will taking off the 2 lower bolts at the bottom or the window accomplish anything. I didn’t want to screw up the up stop setting on the window IMG_0241
-
Have you tried using a temporary hot & ground jumper wire on the motor to get it to go up?
-
Tried that three ways, wire direct from battery, tried from the down wire (yellow with white stripe) coming from the left down relay by using the switch on the drivers door. The down position closes the circuit, that’s how I got the window down in the first place. I also tried a wire from the common wire (red with yellow stripe). All three…[Read more]
-
-
-
-
Duane posted a new activity comment 9 years, 7 months ago
Thanks for the add!
-
Jeremy posted a new activity comment 9 years, 7 months ago
Welcome to Suicide Slabs!
-
Jeremy posted a new activity comment 9 years, 7 months ago
Welcome to Suicide Slabs!
-
Thanks for the add!
-
-
Virgil Gil became a registered member 9 years, 7 months ago
- 1 person likes this.
-
Welcome to Suicide Slabs!
-
Duane became a registered member 9 years, 7 months ago
- 1 person likes this.
-
Welcome to Suicide Slabs!
-
Thanks for the add!
-
-
Jeremy posted a new activity comment 9 years, 7 months ago
Welcome to the site!
-
Andre Smith became a registered member 9 years, 7 months ago
- 1 person likes this.
-
Welcome to the site!
-
Jeremy posted a new activity comment 9 years, 7 months ago
Welcome to the site!
-
Thanks man! I have a 67 coup model 53-A and have a few questions. My left rear window is down in the door, is there a way to manually get the window up? Also i need to replace all the window switches in the drivers door. Been looking online but can’t find any. Do you know where I can find those or know someone who would sell me the switches?
-
Unless your switches are missing or totally screwed up somehow they’re repairable. Email [email protected] – he rebuilds switches.
As for the window there’s no easy way of getting it up if the motor doesn’t work. You’ll have to pull the panel and put it up manually. It might be possible to leave it connected to the motor and mechanism but…[Read more]
-
Thanks man. I’ll check those out for the switches. Any tips on disconnecting from roller mechanism. I have door torn apart and was trying to figure out today. Will taking off the 2 lower bolts at the bottom or the window accomplish anything. I didn’t want to screw up the up stop setting on the window IMG_0241
-
Have you tried using a temporary hot & ground jumper wire on the motor to get it to go up?
-
Tried that three ways, wire direct from battery, tried from the down wire (yellow with white stripe) coming from the left down relay by using the switch on the drivers door. The down position closes the circuit, that’s how I got the window down in the first place. I also tried a wire from the common wire (red with yellow stripe). All three…[Read more]
-
-
-
-
-
Steven became a registered member 9 years, 7 months ago
- 1 person likes this.
-
Welcome to the site!
-
Thanks man! I have a 67 coup model 53-A and have a few questions. My left rear window is down in the door, is there a way to manually get the window up? Also i need to replace all the window switches in the drivers door. Been looking online but can’t find any. Do you know where I can find those or know someone who would sell me the switches?
-
Unless your switches are missing or totally screwed up somehow they’re repairable. Email [email protected] – he rebuilds switches.
As for the window there’s no easy way of getting it up if the motor doesn’t work. You’ll have to pull the panel and put it up manually. It might be possible to leave it connected to the motor and mechanism but…[Read more]
-
Thanks man. I’ll check those out for the switches. Any tips on disconnecting from roller mechanism. I have door torn apart and was trying to figure out today. Will taking off the 2 lower bolts at the bottom or the window accomplish anything. I didn’t want to screw up the up stop setting on the window IMG_0241
-
Have you tried using a temporary hot & ground jumper wire on the motor to get it to go up?
-
Tried that three ways, wire direct from battery, tried from the down wire (yellow with white stripe) coming from the left down relay by using the switch on the drivers door. The down position closes the circuit, that’s how I got the window down in the first place. I also tried a wire from the common wire (red with yellow stripe). All three…[Read more]
-
-
-
-
-
Jeremy posted an update 9 years, 7 months ago
Suicide Slabs moved to new hosting earlier, so if anyone notices any bugs be sure to let me know. The new hosting has all solid state drives, so the site should be MUCH faster!
-
Jeremy posted a new activity comment 9 years, 7 months ago
Call Mario the Lincoln Guy in Yucca Valley, CA. He should have the parts you need. 760-646-7996. Also, you can email him at [email protected]
In the off chance Mario doesn’t have what you need I’d suggest contacting Baker’s Auto or Lincoln Land. You can find links to them here : https://suicideslabs.com/resources/
-
Jeremy replied to the topic Wheel Suggestion on 69 Continental in the forum General Discussion 9 years, 7 months ago
Check out these guys for your wheel needs : http://www.mobsteel.com/ Also check out the offerings here : http://www.coyswheel.com/
-
Jeremy replied to the topic Bolt on Hood Hinges 62 in the forum 61 – 69 Lincoln Parts 9 years, 7 months ago
Roger,
Call Mario the Lincoln Guy in Yucca Valley, CA. He should have the parts you need. 760-646-7996. Also, you can email him at [email protected]
In the off chance Mario doesn’t have what you need I’d suggest contacting Baker’s Auto or Lincoln Land. You can find links to them here : https://suicideslabs.com/resources/
- Load More
