[Joe]

Check out Detroit steel they usually do a 20″ x 9 or 9.5″ wide

[Joe]

Lincoln land or bakers auto

[Joe]

One more

Attachments:

You must be logged in to view attached files.

[Joe]

Few more

Attachments:

You must be logged in to view attached files.

[Joe]

This weekend I’ll cut the lines to fit and do a pressure test then test for leaks. Next I put the interior back in and finish the trunk

Attachments:

You must be logged in to view attached files.

[Joe]

Some more…

Attachments:

You must be logged in to view attached files.

[Joe]

Bending some copper…

Attachments:

You must be logged in to view attached files.

[Joe]

And more of me  por 15 the floors and sound deadener

Attachments:

You must be logged in to view attached files.

[Joe]

Here are some more pics

Attachments:

You must be logged in to view attached files.

[Joe]

My 62 is bagged. I went with Suisidedoors.com. I run 4 compressors 10 gallons of air 8 valves and 1/2 inch line at 150 psi and a 4 link suspension. I use airlift bags 2600 series and smc valves. I have 10 switches. I’ve had my car bagged for about 15 years and no problems. I am going to redo the system this summer. Ride tech makes a nice kit. The rear kit would be 8000 series shockwaves from ride tech. They make control arms and shocks for the car too.

Attachments:

You must be logged in to view attached files.

[Author]

Posts