@nevada67
Active 7 years, 5 months agoYou need to log in or create an account to post to this user's Wall.
-
Steven posted an update 7 years, 5 months agoWanted to find out about swapping out the rear drum brakes to disk brakes on my 67. Is there a kit out there that is recommended for my car? Watched a time lapse video on line that someone posted showing a swap on a pick-up, figured this would be similar. If anyone has done this and could give me some tips or has information to get me in the…[Read more]
-
Steven posted an update 7 years, 5 months ago
Hey. Got question about my gas tank on my 67. Want to fix my gas gauge, it never worked since I bought the car. I’m assuming the sending unit is bad. Can anyone tell where it is on the tank. Hoping I don’t have to drop the tank. If it is bad, what new unit is recommend to replace it. Any help is appreciated.
-thanks -
Steven started the topic Fuse panel on 1967 coupe in the forum Tech Help 7 years, 9 months ago
Can anyone tell me we’re to find what my fuses go to in my fuse panel on my 67 coupe? The paper diagram on the inside cover is so badly faded you can’t read anything on it. I have the original service manual and it tells me nothing on the fuse panel that I can see. I have (4) fuses slots that are not getting power to them. They are the (3) 7.…[Read more]
-
Steven started the topic looking for the 4 window switches in the front drivers door. Can anyone help? in the forum 61 – 69 Lincoln Parts 7 years, 9 months ago
I have a 67 Lincoln continental and I’m looking to replace all 4 window switches in the drivers door. Does anyone have any for sale or can point me in the right direction to find them. Help please
-
Steven became a registered member 7 years, 9 months ago
- 1 person likes this.
-
Welcome to the site!
-
Thanks man! I have a 67 coup model 53-A and have a few questions. My left rear window is down in the door, is there a way to manually get the window up? Also i need to replace all the window switches in the drivers door. Been looking online but can’t find any. Do you know where I can find those or know someone who would sell me the switches?
-
Unless your switches are missing or totally screwed up somehow they’re repairable. Email [email protected] – he rebuilds switches.
As for the window there’s no easy way of getting it up if the motor doesn’t work. You’ll have to pull the panel and put it up manually. It might be possible to leave it connected to the motor and mechanism but…[Read more]
-
Thanks man. I’ll check those out for the switches. Any tips on disconnecting from roller mechanism. I have door torn apart and was trying to figure out today. Will taking off the 2 lower bolts at the bottom or the window accomplish anything. I didn’t want to screw up the up stop setting on the window IMG_0241
-
Have you tried using a temporary hot & ground jumper wire on the motor to get it to go up?
-
Tried that three ways, wire direct from battery, tried from the down wire (yellow with white stripe) coming from the left down relay by using the switch on the drivers door. The down position closes the circuit, that’s how I got the window down in the first place. I also tried a wire from the common wire (red with yellow stripe). All three…[Read more]
-
-
-
-
