and he we are working on putting the the halves together, we had to finish up grinding the surfaces on the 99 and trimming some metal out around the A piller and the top of the cowl so the windsheild will sit flush.
all and all we had it up and down about 20 times it took us only about 5 hours to get from two parts to one
here is where we used a porta power to stretch the 62 wider to fit over the top of te 99 inner rocker as it did a .90 out and a .90 up once stretched open we could set it down all the way and when the pressure was released it snapped tight under the edge and fit perfect
here it is sitting together all on its own
and here we are all together all I did at this time was do some stich welds to hold it together