- This topic has 1 reply, 2 voices, and was last updated 6 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Getting a lot of air in my brake system. Bubbles in the new master cylinder when button is pushed on metering valve. I have tried 3 night to bleeding the system. New wheel cylinder, rear lines and master cylinder. Now putting on metering valve and calipers. Tons of air. Any words of wisdom would be great!
I had the same problem. I ended up buying the pneumatic brake fluid bleeder from Harbor Freight…. best $35 I have spent. I tried hand bleeding, using a mityvac large pump… but the pneumatic did the trick. Check all your lines again for leaks… and make sure the follow the bleeding order that is in the chop manual. Hope this helps.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
