well nibblin around right this minute, both rear doors are done and finishing up some smaller parts that needed to be stripped and primed down.

😎

got my new concept drawing back today, I like the original silver and black but thought it was probably done to death allready, and I wanted some kolor! plus I have nearly all these colors sitting on a shelf allready so why not?! I like it any way and thats all that matters. Some pinstriping and light leafing and I think it will be sic! :cool:…[Read more]

trust me I did alot of thinking on this and after looking at the underside for more then a few hours before doing my cutting and see how the unibody was constructed to ensure strengh and were to cut and not to cut I went and got my tram gauge and did a notebook full of measurements. As I started cutting I stoped periodicaly to remeasure not…[Read more]

here it is on the body dolly I quicly constructed to take it to the shop so I can prep the inside to fit

hahahahhaa!! it was a necessity, every spot weld was cut out and the front was seperated from the uniframe. The course in wich im taking the car made me have to do that to fit parts together and correctly weld everything. dont worry the front and fenders are put up nicely in the side shop :smt008

edit:

the front end

here how it looks…[Read more]

well….most can understand how much is involved in rebuilding these cars…. I bet nearly none can understand what im allready halfway accomplished under your noses to my car… as all plans nothing ever goes right with them… mostly time.. But I’m sticking to my guns. And by september my car will once again drive… not finished but partialy.…[Read more]

well the doors are almost done, since I work at a body shop durring my lunch and slow time, I got them all stripped the body work done and got the two front doors seamed up and in primer, im still working on fixing the rusted out portions of the rear doors then I will finish them off like the front doors. then they will be sealed from the inside…[Read more]

wow! so many things to do so little time! any way… Im finaly going to get back on track, I have many new parts comming and most of the parts I need to finish my build. Also I ordered my wheels today!!! im so feakin excited!! I got them second hand and nearly new (only on car for 2 months never driven!) and at a sweet price!! here they are. of…[Read more]

got the front end in poly today, after doing some body work to it, the left fender had a bunch of scrape areas in the metal that I woked out, ending up sand almost most of the filler off, then onto the poly, I put half gallon up front equivalent to about 10 coats for primer other wise. Im done til the next opportunity arises to work on it! 8)

well I have a lull in customer projects this weekend thanx to some custom paint NOT showing up….so…My little cuz helped me get my linc into the shop for some much needed attention! 😀

first things first….lets take care of that redneck bite mark in my frame….

I have a bad habbit of not taking pictures when I need to…. I did…[Read more]

well my powdercoater guy sent me an email with a few pics of the first few parts I dropped off to him for my linc to get done. The powdercoat is singlestage chrome, while it dosnt come out just like chrome it does resemble a nicely polished billet aluminum look, wich I think will help distingquish my lincoln from many others that have been…[Read more]

finaly my motor trade went through, the guy came today 5/2/08 and picked up my 460 anchor and droped off my 1970 302 and trans, it was in a fairlane untill it was wrecked 4 years ago, turns over frealy, tomorow I plan on taking all the mounts and pulleys off and send them for PC along with the other parts I need done. Looks like crap but will be…[Read more]

finaly my motor trade went through, the guy came today 5/2/08 and picked up my 460 anchor and droped off my 1970 302 and trans, it was in a fairlane untill it was wrecked 4 years ago, turns over frealy, tomorow I plan on taking all the mounts and pulleys off and send them for PC along with the other parts I need done. Looks like crap but will be…[Read more]

Ya know you wake up in the morning and theres like 18 hrs of time you can work on something, why is it that you only end up with 1 hr at the most to work? 🙄 lol anyways a bit of progress, I got the front apart, wish someone told me the grill is satans child to take out….. 👿 still have the right rear door to take off, started on the…[Read more]

boy I sure dislike retards, look what they did to my engine bay!

been working off an on on the linc this week, here are a few pics of the hood work, also I have some time this weekend, to remove the doors, fix all the bad spots on the doors and get them in finsih primer, thats my main plan, also the shop plans to pull that 460 out saturday as well.

well I had a few extra mins to tinker with my toy today. got the rear parts pulled of and the trunk cleaned up along with the interior floor cleaned up. The extent of the rust damage isnt a worrie to me I plan to cut and patch all the rotted holes I find, then get some POR15 and put a good cover coat over everything in the trunk and in the…[Read more]

did some tear down this weekend, got the trunk off, wich is so fat rusted nothing about it is salvageable, found a bunch of interior trim in the trunk along with the headliner (it was soaked and rotted) a few misc parts and a few years of debri on the bottom. After cleaning out the trunk I let it dry out, there is only some minor rot where the…[Read more]

picked her up today! put some knockoff wires on it so I could get it out of the dirt and load it up, while it was jacked up I got a good look of the underside, wich is very solid, no rust through, full exhuast still intack and no driveshaft wich is another thing im not worried about. Got it rolling and my freind came and helped me out (hes the…[Read more]

just received a concept drawing from a freind of mine a few mins ago, let me know what you guys think! I told him how I wanted it to look and thats it!