68 driver window switch help!!

Home › Forums › Suicide Slabs Build Pages › 68 driver window switch help!!

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 24, 2018 at 11:19 pm #1713

    Pat (68′ Continental)
    Participant

    I have a 68 and all of my windows work on their own switches except the driver (wing or window). I had the driver window master switch as well as the wing window switch rebuilt. The back windows roll down with this switch but not the front… wing or full. I have the wiring diagram but the wiring is different than the diagram. I can see the switches drawing power when I hit them but no movement. Any thoughts?

     

    Thanks!

    May 25, 2018 at 8:28 pm #1715

    Socal Jon
    Participant

    I would check the contacts on the drivers door plug. When I went through my car, a lot of those contacts were corroded. I scraped them with a mini screwdriver, and smashed them closed (not completely closed) to create a better contact. If you tested the new switches on the other windows and it proved to work, then the switch is the known good. You would start at the contacts for the drivers door, then work your way back. I hope that this helps.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.