I’m looking forward to following this bad ass build!

Ryan, there are front sump pans available for the Cummins diesel. It wouldn’t be much of a problem to change out the pick up tube and pan. Though if you plan to change out the entire front suspension and crossmember than you can make anything fit.

EDIT : Apparently the pan itself can be reversed, but you’ll need the appropriate front sump pickup…[Read more]

Minor updates to the back end of the site this evening.

Also, users can now post 20MB attachments in the forums.

I’d suggest getting some pictures and posting them when you can. Good luck with the sale!

I’d go through the normal tuneup things – plugs, points, condenser and rotor, distributor cap, set the dwell, etc and see if that helps.

I’m fairly certain some firewall mods will be needed in order to fit a Cummins in there, and you’ll probably wind up modifying the transmission tunnel a bit too depending on what you plan to put behind that…[Read more]

And here’s a mirror hosted on Dropbox : https://www.dropbox.com/s/7qcsotgpy5dzfi8/63-74%20Ford%20Interchange.pdf?dl=0