and here are some pics of it just out and about

getting some ching chong food looking all menacing

😈

huntin cute girls at the mall 😀

being all studious in the shop fixin to skool some muthafugas 8)

making grass beg for mercy at work

:smt005

hope you guys enjoy, every day I do more and more work im chipping…[Read more]

here we go!

hows this for a loop who else is doing 60 mph with over 30 mpg in their 62? 😆

here is the new 99 window motor on the 62 regulator ready to get hooked up fits in door perfectly no clearance issues

here is the left quarter getting finished up where I widened the wheelhouse for clearance, getting the gas door suround in…[Read more]

got the headlights and tailights working and got the drivers window wired up and working (the only one)

had some extra HOK black shimirin so I made it a uniform black it isnt perfect and no body work has been done but its solid.

picking up my tag today 😈

got one tail light done.

was just going to patch in the original bulb and socket but why not uprgrade?

added two more holes to have all three 99 towncar bulbs in the bucket working

alittle snug but all good

running

stopping!!

I dont think anyone will miss these lights! 😯

working in between stuff drying at the shop had to cut and drill the rear veiw mirror braket to hold my new mirror, also stripped the chrome and sanded it and did a quick polish to make it presentable.

I think it may look aight in there 😈

this mirror has followed me around for a number of years and a number of vehicles I think its…[Read more]

here she is on the road, first long drive no lights no windows getting stuff together

got the windows in without regulators,

couldnt use the stock air cleaner and intake so I had to make a new one

ill get more when I do more

😈

moved along faster then I expected on my first fender so I brought it home to check it out so here are some pics of the process so far.

here is the fender cut at all the measured lines I wanted to do, one of the guys at the shop commented that I got to cut every panel on my car at least a few times lol

in this pic I moved the middle…[Read more]

ok well ive been doing small things here and there just test fitting parts etc etc… did manage to final y buy some tires for my wheels picked up a set of new goodyear 205/70/15 wich came out to be the same height as the original wheel and tire combo so im happy with that. But apon installing my rear wheels I found a new problem the extra width…[Read more]

chillillillllln in the port 8)

before I brought it home I stripped the top and got it in black epoxy

now I need to do a bit more front end reinforcements where everything mounts to the main body then cut the front end off to complete all the finish welding to the framework up front before reattaching it back to the body,…[Read more]

got a bit done this week again

made a hood latch and striker worked out well got plenty of adjustment now I dont have to worry about the hood flying open while driving in reverse! :0

the hood striker partly pirated from a chevy trailblazer 😉

and reusing my stock 99 lincoln hood latch just got to add a lower brace to steady it more,…[Read more]

yea my phone only barely pics up sound 😕

been putting in some time this week

welding up some reinforcement brakets were the hood hinges bolt to

that made the upper front pretty firm feeling 😉

added the rear hood crossbar so I can mount the hood latch hopeully next week be able to get that all sqared away

then I decided to…[Read more]

and that would be quite awesome 😈

had an extra hour at work so I pulled the doors back out of the back room and sprayed in POR15 al over the inside made sure I got it all in there good I will still shoot some bedliner type material before its done.

swapmeet tomorow! going to see if I cant loose some mula lol 😎

got the main battery box mounted in, started on the wiring and reinstalling the dash so hopefully I can get this beast running again by the end of next week 😎

all mocked up and tacked in

and with the battery in

its both mounted to the main body mount and to the upper support…it isnt going anywhere :biggrin:

still got to…[Read more]

the chomoly will hardly be a problem on this type of car, I used to race atvs and only had one of my aftermarket chomoly frames crack only becouse I was running a cr500 in it and the vibes were tremendous. Being a regular driven car and not getting abused I think it will hold up just fine, plus I like saying its got a partial chomoly frame..…[Read more]

well the holidays slowed me down plus waiting on my metal etc etc etc……

any way got my 1×1 and 2×2 16 gauge chromoly tubing, two sticks totaling more then 40ft dosnt add that much to the over all weight added to the car

my tubing awaiting its fate 😈

now that I had my metal to build the front end I mocked up the front end…[Read more]

thanx man! ill get with you after thanksgivin to get that lid out of your way :smt006

any way slow week all I did was finish mounting the pump brakets up and welding them in and welding the battery box in solid still need to make a lower reinforcement but I broke my cutter as I was making it so Ill get a new blade next week.

then…[Read more]

just did some minor stuff this week ill finish up all the underfender stuff next week 😎

pump spacers made and pump mounted anf the fender mounted to show the clearence that is avail

then since I wasnt happy with the battery indention made on the driver side I made a heavy duty box to mount the battery and got that tacked…[Read more]

just been slowly making all the mounts for the hydraulic pumps and welding in the front pumps, ordered a new spline key for the pump and some cylinder rebuilds for the front I got to go pick up some fittings that I need to use and order hopefully the manifold to controle everything next week

making the mount for pump

the pump is bolted in…[Read more]

gooooooooiiinnnnnnnggggg DOWN……….. 😈

now started on cutting everything out and mounting the hydraulic cylinders

once I get all this mounted the way I want it to be ill get rolling on putting the front sheet metal on 😉

well big bummer that my supremes didnt fit…so I sold them :smt010 and I knew what I wanted and came up on a good deal for a set so hopefully after next week ill be getting a set of 15×7 standard 40spoke starwires! 😯 😀

I guess ill get some three wing spinners for them or maybe some bullets but ive never seen starwires with…[Read more]