did alittle work on making some back interior stereo speaker pods, my next main adventure is sorting out the interior this summer along with some stereo

first fabbed up the backing board and speaker pod and test fit

then I stretched some material over it all and fiberglassed it

got them all smoothed out

then covered them in…[Read more]

some new shots of everyday life

just crushing grass

finally got my pump and manifold situated the way I want it, resides behind passenger front tire

just enjoying local cruis-ins

got to take my equally awesome daughter to a Halloween party in the big Linc

just strutting its stuff!

Man that’s beautiful.

Lincoln Land should be able to hook you up. You can find them here : http://www.lincolnlandinc.com/

And it appears this person has done the joint on a 64 : http://bigfancycar.blogspot.com/2014/04/a-diy-guide-to-rag-jointsteering.html

I don’t know anything about that forum, but I know that some of them don’t like anything but 100 percent original cars. Some of the Facebook groups are the same way and that’s how this site and the FB group came about.

Photobucket and Flickr can host your images, and you can also host them here. I just installed a site wide photo gallery late…[Read more]

This site is in no way tied to thelincolnforum.net. There might be some members here who are also members there. I’m not a member there, at least that I can recall.

This site is totally intended for open minded people. Most of us like to customize/restomod our rides and this site is aimed at just that. Of course purists are welcome but…[Read more]

This site is in no way tied to the lincolnforum.net. There might be some members here who are also members there. I’m not a member there, at least that I can recall.

This site is totally intended for open minded people. Most of us like to customize/restomod our rides and this site is aimed at just that. Of course purists are welcome but…[Read more]

got the pump filled and ready togo in

it was a pig making it fit in… I knew it would be tight in there but damn…lol…beats having it taking up space in the trunk

made a quick template for a close out panel ill get some sheetmetal to make thse out next week

all I got to do now is run my battery wiring and hook up the solonoid and…[Read more]

what im working on now for her

this will take the place of the old fener gate pump ive been running, this will give me alot more movement as well.

finaly started putting on some of the trim Ive had put up for years back on

here she is sipping at the pump

got some more stuff to post later…stay tuned!

out after two cure cycles… it pinched up some but it will be a good solid base to fix all the body imperfections and other things that may pop up before I do my final paint

nothing special about the paint right now, just a black Limco Singlestage, witch I got to thank Accurate Auto Paint in Valdosta, GA the hookup

its a 20 footer…[Read more]

well got back on it again doing smaller spots like welding holes up and smothing over bad spots

along with finaly smoothing out the fender jambs and sealing them in well

then I decided to throw on some color on the outside at least till I have all my ducks in a row, then do my final paint only after I have my wheels, new chrome, full…[Read more]

well I started back on trying to get the rough bodywork done to this monster so got onto the front end again

getting the body up top to match the hood and blocking the rest out halfway decent

hood fit alot nicer now

also blocked and did addtional work to the fenders as well along with blocking and repriming the roof

and for…[Read more]

also finaly did the body work to the trunk lid along with the lower right quarter panel, its all roughed out in those areas now, so im just left with some upper fender work

had some custom spoons made of my design so I can straighten up the camber on the front, using heavy duty 2500 balljoints it did the trick, now my tires are perfect vertical rolling low. made of 1/2 because I dont need nothing heavier for this application.

made me a remote fill tank for my hydraulic pump hidden in the fender…

used part of a pump resivior

mounted up squeeky clean

still got to weld a bung under it to hook a line to the pump resi but its close

also finly got started on my right side pipes and extending my rocker like the left…

slow day at work resulted in this

BOOM!

heres the old one….still worked but weeping out water steadily

got my 4 inch cylinders in yesterday as well 😎

comming together :dance:

back for some updates!

finaly tired of riding static and decided if I dont get my ass in gear ill have paint on this unit before the hydraulics are working!! soo…. I allready have my plans laid out to order a few things but I went ahead and setup a single dump gate pump for the rear and hooked it up so I can lift the rear for some travel…[Read more]