yea my phone only barely pics up sound 😕

been putting in some time this week

welding up some reinforcement brakets were the hood hinges bolt to

that made the upper front pretty firm feeling 😉

added the rear hood crossbar so I can mount the hood latch hopeully next week be able to get that all sqared away

then I decided to…[Read more]

and that would be quite awesome 😈

had an extra hour at work so I pulled the doors back out of the back room and sprayed in POR15 al over the inside made sure I got it all in there good I will still shoot some bedliner type material before its done.

swapmeet tomorow! going to see if I cant loose some mula lol 😎

got the main battery box mounted in, started on the wiring and reinstalling the dash so hopefully I can get this beast running again by the end of next week 😎

all mocked up and tacked in

and with the battery in

its both mounted to the main body mount and to the upper support…it isnt going anywhere :biggrin:

still got to…[Read more]

the chomoly will hardly be a problem on this type of car, I used to race atvs and only had one of my aftermarket chomoly frames crack only becouse I was running a cr500 in it and the vibes were tremendous. Being a regular driven car and not getting abused I think it will hold up just fine, plus I like saying its got a partial chomoly frame..…[Read more]

well the holidays slowed me down plus waiting on my metal etc etc etc……

any way got my 1×1 and 2×2 16 gauge chromoly tubing, two sticks totaling more then 40ft dosnt add that much to the over all weight added to the car

my tubing awaiting its fate 😈

now that I had my metal to build the front end I mocked up the front end…[Read more]

thanx man! ill get with you after thanksgivin to get that lid out of your way :smt006

any way slow week all I did was finish mounting the pump brakets up and welding them in and welding the battery box in solid still need to make a lower reinforcement but I broke my cutter as I was making it so Ill get a new blade next week.

then…[Read more]

just did some minor stuff this week ill finish up all the underfender stuff next week 😎

pump spacers made and pump mounted anf the fender mounted to show the clearence that is avail

then since I wasnt happy with the battery indention made on the driver side I made a heavy duty box to mount the battery and got that tacked…[Read more]

just been slowly making all the mounts for the hydraulic pumps and welding in the front pumps, ordered a new spline key for the pump and some cylinder rebuilds for the front I got to go pick up some fittings that I need to use and order hopefully the manifold to controle everything next week

making the mount for pump

the pump is bolted in…[Read more]

gooooooooiiinnnnnnnggggg DOWN……….. 😈

now started on cutting everything out and mounting the hydraulic cylinders

once I get all this mounted the way I want it to be ill get rolling on putting the front sheet metal on 😉

well big bummer that my supremes didnt fit…so I sold them :smt010 and I knew what I wanted and came up on a good deal for a set so hopefully after next week ill be getting a set of 15×7 standard 40spoke starwires! 😯 😀

I guess ill get some three wing spinners for them or maybe some bullets but ive never seen starwires with…[Read more]

had a chance to work on this saturday for a few hours I wanted mainly to finish up the welding on the rear of the car (trunk/rear wheelhouse) and clean up a few things

underside welded and seamed in

I know alot of you guys will hate me for this but oh well im hated allready anyway lol

at least its…[Read more]

not much of an update weve been super busy at work and Ive had to leave and do some errends durring lunch so I only got a few hours in on it this past week, I plan on alot more the comming week and plan on nearly a whole day on it next sat most likely Ill finish up all the main welding then 😎

still working on the trunk making the filler…[Read more]

I dont understand why everyone would keep thinking that, I have a 4.6 in my 97 truck and it ripped 96mph in the quarter mile its xcab as well seems to haul it around as well.

now as for weight

when the underbody of the 62 was completly removed I could physicaly pick up the complete shell of it and move it myself (standing inside behind the B…[Read more]

thanx for the props homies! 😎

not much to show just pluggin along Ive been working on cleaning up the A piller and boxing them in, I plan on getting all the welding done to the car then Ill seam it all in so everything looks clean and factory fresh 😉

got my sheet of 18 guage to do everything with! :biggrin:

putting the…[Read more]

I had a hour after work friday and decided to see how bad the front end will have to be modded to make work so I went to town on the front of my car. Now this by no means is nothing more then just a mock up right now I want to get the main body and the suspension doen before I get to the front.

first I had to cut the front cross reinforcement…[Read more]

well I only have my lunch break and a hour or two after work to do alittle work to this doll im by no means rushing this job but things seem to be pluggin along quite nicely.

here is the rear body panel area the 62 lapped the 99 body panel reinforcement perfectly enought to punch in some spot weld holes and firmly weld up the rear body panel,…[Read more]

and he we are working on putting the the halves together, we had to finish up grinding the surfaces on the 99 and trimming some metal out around the A piller and the top of the cowl so the windsheild will sit flush.

all and all we had it up and down about 20 times it took us only about 5 hours to get from two parts to…[Read more]

and now getting ready to mate the two halves

got the 62 up on the open lift and welded the outer rocker together as its in two peices

the 99 waiting patiently to be unloaded

:0

ok since I posted up the teaser pic lets see how we got to that point

ok back to my 99 many hours of dismantling it and cutting metal off making sure parts were still usuable later if needed on anything else, all the while taking measurments and going between both cars to make sure I cut enough and not to much off the 99 to make the 62 shell…[Read more]

heres a teaser + im having trouble getting my pics off my jump drive to upload….grrrrrrr if I loose all the pics from the work done im going to muder someone 👿

on four wheels again…

awesome