vacuum tubing replacement

Home › Forums › Tech Help › vacuum tubing replacement

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 14, 2018 at 7:56 pm #1645

    Bob Hughes
    Participant

    I,d like to replace the vacuum tubing inside the engine compartment while I have the engine out. I would like to know if the engine compartment tubing goes through the firewall into a manifold/junction box. Can I access this connection from the engine compartment or do I have to disconnect the tubing inside the interior? Does the tubing plug in to the manifold from the outside? Tks

    February 15, 2018 at 10:42 pm #1647

    Bob Hughes
    Participant

    I,d like to clarify my query.  Can I disconnect the engine compartment tubing from the  fire wall or does the tubing pass through the firewall?  from the interior  I can see what looks like a block that may be a junction block or a manifold?  I was hoping that tubing pushes on to this block

    April 4, 2018 at 7:06 pm #1664

    Bob Hughes
    Participant

    I have replaced the vacuum tubing in the engine compartment .  There is a manifold on the fire wall and the tubing that passes through the firewall  pushes onto this manifold. so pull off the old and push on the new.  Same inside under the dash. 

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.