well got back on it again doing smaller spots like welding holes up and smothing over bad spots

along with finaly smoothing out the fender jambs and sealing them in well

then I decided to throw on some color on the outside at least till I have all my ducks in a row, then do my final paint only after I have my wheels, new chrome, full…[Read more]

well I started back on trying to get the rough bodywork done to this monster so got onto the front end again

getting the body up top to match the hood and blocking the rest out halfway decent

hood fit alot nicer now

also blocked and did addtional work to the fenders as well along with blocking and repriming the roof

and for…[Read more]

also finaly did the body work to the trunk lid along with the lower right quarter panel, its all roughed out in those areas now, so im just left with some upper fender work

had some custom spoons made of my design so I can straighten up the camber on the front, using heavy duty 2500 balljoints it did the trick, now my tires are perfect vertical rolling low. made of 1/2 because I dont need nothing heavier for this application.

made me a remote fill tank for my hydraulic pump hidden in the fender…

used part of a pump resivior

mounted up squeeky clean

still got to weld a bung under it to hook a line to the pump resi but its close

also finly got started on my right side pipes and extending my rocker like the left…

slow day at work resulted in this

BOOM!

heres the old one….still worked but weeping out water steadily

got my 4 inch cylinders in yesterday as well 😎

comming together :dance:

back for some updates!

finaly tired of riding static and decided if I dont get my ass in gear ill have paint on this unit before the hydraulics are working!! soo…. I allready have my plans laid out to order a few things but I went ahead and setup a single dump gate pump for the rear and hooked it up so I can lift the rear for some travel…[Read more]

got my new intake painted today 😎

Ill paint some more engine parts when I take them off when I put the intake on :think:

got the drivers fender in rough bodywork and primer today

and smoothed out and primed my remolded drivers arm rest.

tomorow ill probably put the drivers interior door together so everyone can get an idea how it will be when done.

oh btw….Am I the only one that is putting in work now?

ok finally had the chance to post again…

here is the right fender in primer after rough body work…. it turned out pretty good so far

heres an update on the drivers door panel, now you can kinda see where im headed

ill post some more pics after this weekend of everything as well.

oh and got my two chambers in!!! whoot!!!

just…[Read more]

Wixom, my panels where complete but raggedy… that metal armrest is actually the stock inner metal off the original drivers door but had to be shortened as the 99 dash extends out further than the 62… I think Ill complete the metal work on the drivers door panel this week so I can and everybody else better visualize the end product.

I got…[Read more]

tired of riding around looking at the insides of my doors :smt011 and had never really put much thought into exactly what and how I was going to do for door panels… But after getting sick of seeing the insides in my spare bits at work have cut and fabbed some panels… I got only the drivers side done the passenger is just the sheetmetal yet…[Read more]

got the fuel pump in wich much fuss!

started right back up…but… apparently this fuel pump works so well or the old was so bad that the pressure is up and while it runs better I think my fuel filter is now clogged up…grrrr…at least its right on the frame and $12 lol… Now I got to put on a new intake, since mine is cracked and has…[Read more]

im a looser…. only pic I took while welding on the passenger fender….durrr….

in any case the passenger fender is fully welded now, I also cut the patch for the right rear quarter and did some other things then the fuel pump finaly quit so shes chilling at a freinds house untill my new pump comes in hopefully today or tomorow…. then…[Read more]

took her out to an indoor toys for tots christmass car show… had ALOT of questions… hell most people didnt even know what kind of car it was… let alone whats been done to it. Guy in a 63 T-bird showed up wich made some cool pics 😀

and one of her and my truck hanging out continplating shinanigans 😈

got the exhaust up and in!! it still dosnt have the mufflers on yet but its complete and man its not at loud as I expected in fact at interstate speeds its got a wicked sweet growl going. Cant wait to get the muffs on it (2 chamber 40 series flowmasters) and hear it then!

Made the the midepipe fully removable wich made the whole build cleaner and…[Read more]

few more pics from the Photoshoot

photo shoot my freind was doing she wanted my car in it, so I reflatted her and put on the peak moulding (first time on car since I picked it up) these are just some tease pics when I get finished pics ill post some more 😀 :smt006

soo this is how the story goes….me and my GF were going to a 311 concert in Tampa Fl july 23… awesome!!! planned on taking her car (Nissan maxima) now I did say we could take the the big linc but agreed we would roll the maxi…..she shows up late july 23… and says “we’re taking the lincoln 😯 ” I was like ok, but I didn’t even get it…[Read more]

just a few minor updates

screwing off….trying an idea off the HAMB…

not bad!!

the paint is holding up for the most part as my car is now daily driven again…. its cracked but still holding ok…. so for a time being idea it works out ok. KRYLON fusion paint one can will do all four tires ( I grinded and buffed a tire prior) I…[Read more]